russ98stang

I Got some springs from a guy over craigs list and was wondering a couple of things. first off, on the website (below) it says they are for 79-93 and dosnt mention anything about 94-04. The other thing is it says it drops the fox an 1 1/4 to and 1 1/2". would it drop ours too much? im thinking probally around 2". I got 18" wheels with 275 on front and 295 on rear. im worried that it may drop it too much and either look like **** or the wheels may hit.

also, will i need any thing to fix any clearence issues like the steering or what ever?

http://www.mustangsunlimited.com/ite...ccode=MULMVWEB

russ98stang

???bump???

Sxynerd

YOu should re-read the page you linked. Then compare it with the year of the car, years of the springs and the section you started this post in and get back to us.

Jbauer

IT'll fit on your car, but i don't know how much it'll lower it. 1.5 on a fox is like 2 on a Sn95 i think.
That is a pretty agressive spring, i don't know how well you'd like it. 600+ AND linear..it'll be a bit rough

defconfire

I am running 650 linear up front on a coil-over setup which is actually about 120% greater than the stock spring location. So its like a 1430 lb/in and it is a bit rough but its all worth it on the track.