4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Looking for opinions on next mod

Thread Tools
 
Search this Thread
 
Old 05-29-2005, 02:46 PM
  #11  
00GT00
2nd Gear Member
 
00GT00's Avatar
 
Join Date: Jul 2004
Location:
Posts: 263
Default RE: Looking for opinions on next mod


ORIGINAL: 2000GT4.6


ORIGINAL: Wyked1

I am not trying to start a war with this post, but currently all that I have done to my car is lower it about 1.5 and throw on a CAI. After I get the Caster/Camber plates figured out, I'll be itching for something new, providing that it is inexpensive. I don't run at the track, I just like to tear open on the back roads every now and then and have debating whether a new exhaust, control arms or any other inexpensive mod would be better. Ideas?
Gears, no question. If you have a 2000 or below (t-45/t-5) go with 3.73s. If you have a 2001+ (t3650?) go with 4.10s.

Gears will be your biggest bang for the buck. They should cost around 150-200 bucks, and perhaps another 200 or less to install. Don't go to a dealer, go to a performance shop that has done an 8.8 before, preferably a mustang shop.
Why did you say this? I have a 00 with 3.73's but I was going 4.10's real soon? Whats the difference?
00GT00 is offline  
Old 06-01-2005, 01:24 AM
  #12  
Wyked1
Thread Starter
 
Wyked1's Avatar
 
Join Date: May 2005
Posts: 5
Default RE: Looking for opinions on next mod

Gears, then mid-pipes, then catback. High flow cats I am assuming on the mid-pipes. Cool thanks guys
Wyked1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dokilar
4.6L (1996-2004 Modular) Mustang
15
10-16-2015 08:13 PM
UrS4
S197 Handling Section
10
10-03-2015 06:23 AM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 10:29 AM
TimeLord101
New Member Area
2
10-01-2015 06:40 AM



Quick Reply: Looking for opinions on next mod



All times are GMT -5. The time now is 08:25 PM.