4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Interior A/C faceplate Light keeps going out...

Thread Tools
 
Search this Thread
 
Old 11-20-2008, 08:27 PM
  #1  
Kdaddy
2nd Gear Member
Thread Starter
 
Kdaddy's Avatar
 
Join Date: Dec 2006
Location: West Virginia
Posts: 328
Unhappy Interior A/C faceplate Light keeps going out...

I've replaced both lights now since 2 weeks ago and it just keeps going out on me. It's random it's either the warm/cold AC lights or the other where you adjust where the AC goes. And for the life of me I can't figure out why this is happening? I thought 2 weeks ago "Ok i'll just replace them both and i'll probably never have to replace them for at least a few years.." Well that was definitely not the case.

Is this a common Mustang problem? Is there anything else i should look for? I know that when it goes out it flickers around for a bit than it just dies. What should I do keep putting light bulbs in? lol.. Thanks for any feedback. Ford Rocks!!

-Chris

Last edited by Kdaddy; 11-20-2008 at 10:13 PM.
Kdaddy is offline  
Old 11-20-2008, 10:12 PM
  #2  
Kdaddy
2nd Gear Member
Thread Starter
 
Kdaddy's Avatar
 
Join Date: Dec 2006
Location: West Virginia
Posts: 328
Default

Update: Just went outside to move the stang and it worked.. So i guess it's like an on/off thing lol. Will most likely go out again though. ANy feedback at all?

Last edited by Kdaddy; 11-21-2008 at 01:50 AM.
Kdaddy is offline  
Old 11-21-2008, 08:32 PM
  #3  
Soldier GT
6th Gear Member
 
Soldier GT's Avatar
 
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Default

CC it's a Mustang!!!!! Why r u worried about interior lights? Please tell me you have some mods and if so why haven't u listed them........
Soldier GT is offline  
Old 11-23-2008, 01:26 AM
  #4  
Kdaddy
2nd Gear Member
Thread Starter
 
Kdaddy's Avatar
 
Join Date: Dec 2006
Location: West Virginia
Posts: 328
Default

lol well here's an update i guess from when i replaced both bulbs last time i didn't properly fasten one. Problem solved. And lol working on the mod part now. Just need that cash.
Kdaddy is offline  
Old 11-23-2008, 07:45 AM
  #5  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default

Geeze, I wouldn't have guessed that!
Sxynerd is offline  
Old 11-23-2008, 01:17 PM
  #6  
Soldier GT
6th Gear Member
 
Soldier GT's Avatar
 
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Default

Glad you figured it out. The dealer would have probally charged you about 50 bucks just to fasten it in.
Soldier GT is offline  
Old 11-27-2008, 11:43 PM
  #7  
Kdaddy
2nd Gear Member
Thread Starter
 
Kdaddy's Avatar
 
Join Date: Dec 2006
Location: West Virginia
Posts: 328
Default

Originally Posted by Soldier GT
Glad you figured it out. The dealer would have probally charged you about 50 bucks just to fasten it in.
Sadly I thought I did and well the problem reoccurred. It just phases on/off. I'm going to check all fuses tomorrow after work to see if i can find anything different. But it's just kind of annoying when you expect it to work and it's not. Worst comes to worst i'll probably have to take it the dealership as there might be a short somewhere. Weird things like this always happen to me. =(

-Chris
Kdaddy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vargas
4.6L (1996-2004 Modular) Mustang
7
06-17-2017 12:17 PM
McLeary
New Member Area
9
03-14-2016 07:50 PM
Shawmp
S550 2015-2023 Mustang
0
09-18-2015 07:52 AM
MusicCity615
General Tech
7
09-12-2015 07:05 AM
mrmrultimate
Texas Regional Chapter
2
09-10-2015 09:43 AM



Quick Reply: Interior A/C faceplate Light keeps going out...



All times are GMT -5. The time now is 08:54 AM.