josmoe5000

I have a leak that appears to be from the rear main oil seal. I have a week off from work at the end of January and plan on dropping the tranny to replace that seal and install a new King Cobra clutch. Could you guys tell me what else would be wise to do while I have it dropped?

Thanks in advance.

Chubstang

Replacing the throw out bearing and pilot bushing would be a good idea.

mustangman36578

+1. also possibly resurface or replace flywheel depending on its condition and put some white lithium grease on the ball stud and input shaft sleeve.

J_Rod

have fun, its a pita putting it back in the car.

josmoe5000

Thanks for the replies.

Also, where can I get the best deal on a King Cobra clutch?

ZW99GT

I would certainly resurface the flywheel. Most of the time companies make a clutch kit that will come with a replacement TOB and pilot bushing.

Good luck. Just take your time.

jlg32281

You can get the clutch kits on ebay pretty cheap.