MustangForums.com

4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Help with P/S pressure line removal

Thread Tools
 
Search this Thread
 
Old 04-11-2009, 03:30 PM
  #1  
pbshow
Thread Starter
 
pbshow's Avatar
 
Join Date: Apr 2009
Location: Ohio
Posts: 17
Default Help with P/S pressure line removal
Help! I'm putting a new power steering pump on my '98 GT and I can't get the lower power steering pressure line off. The Ford manual states that it is a "quick-disconnect line" but it won't come out. It there a snap-ring holding it in? It's starting to iritate me. Any help would be appreciated.

Thanks,

PB
pbshow is offline  
Reply
Old 04-11-2009, 07:16 PM
  #2  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default
If you're talking about the line on the pump itself behind the pulley it's an 18mm and there is a bracket holding it tight to the pump that is 8mm.
Sxynerd is offline  
Reply
Old 04-11-2009, 08:58 PM
  #3  
GTtony
1st Gear Member
 
GTtony's Avatar
 
Join Date: Oct 2008
Location: CA
Posts: 120
Default
Originally Posted by sxynerd
If you're talking about the line on the pump itself behind the pulley it's an 18mm and there is a bracket holding it tight to the pump that is 8mm.
How many posts till im not a Noob anymore? ... I know the damage we can cause too. remember the turd who ran H2o through his engine. LOL
GTtony is offline  
Reply
Old 04-11-2009, 09:21 PM
  #4  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default
As long as you know what your talking about when giving advice to other people you're good. There's nothing worst than bad advise.
Sxynerd is offline  
Reply
Old 04-11-2009, 09:28 PM
  #5  
GTtony
1st Gear Member
 
GTtony's Avatar
 
Join Date: Oct 2008
Location: CA
Posts: 120
Default
Originally Posted by sxynerd
As long as you know what your talking about when giving advice to other people you're good. There's nothing worst than bad advise.
LOL then i better STFU........kidding.
GTtony is offline  
Reply
Old 04-11-2009, 09:38 PM
  #6  
Sxynerd
6th Gear Member
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Default
Originally Posted by GTtony
LOL then i better STFU........kidding.

I think you'll be getting along fine here smart ssa!
Sxynerd is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snow performance stage 2 MAF boos cooler install
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
Starting Issue
svfetter
5.0L (1979-1995) Mustang
9
10-05-2015 11:39 AM
84 mustang rearend brake fittings
67LimeCoupe
5.0L (1979-1995) Mustang
9
09-21-2015 06:34 PM
Diagnosing Fuel Pump & Pressure
SteelerNation82
V6 (1994-2004) Mustangs
1
09-16-2015 07:11 AM
Steeda & Nitto Tire Testing NT555 G2 - Great Photos Inside!!
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM
Back to Subforum
4.6L (1996-2004 Modular) Mustang
View Next Unread
whats better for more horsepower




Advanced Search
Quick Reply: Help with P/S pressure line removal


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 05:44 PM.