dvs_03gt

A friend of mine wants to cut his 04 gt springs a coil and has no camber plates. Is this okay?

What if he just did the fronts??

Thx
-Dvs

StriderTacticaL

Theres a thread somewhere in this forum of some guy who cut one whole coil and it actually looked REALLY good....but many say you mightaswell buyt some FRPP C springs for cheap than to cut the stock ones if you want to go a cheap route

Drag5.0mustang

yea i would just buy new there like 150$

mustangman281

It is fine to cut them. I know people that have been running cut stock springs for years.

Pohatu18

I cut a coil off all of my springs, the only thing bad is this slight squeak coming from the rear passenger side(Im thinking the LCA).
My sig is uncut springs. And I also left in the isolators without them it would of been a slightly larger drop(mabey .5")

grogan

04's dont have coil overs..they have just a regular spring and shock.

Blk003GT

i did it..just be careful i hacked the crap out of my front springs and lowered it too far. it looked good but was way too low had to buy SS's

dvs_03gt

looks good. hows the ride?? and should you have left the isolators on? Is it not good to run without them??

yeah sorry, i corrected my typo

how did you cut too much? I plan on helping my buddy so I am only going to take one whole coil off. you get some pics??

tempoffroad

been running mine cut for a year 100 miles a day and i cannot tell a difference in the ride and it looks good.

jtfrog

Don'T go any lower than my drop in my Sig. This is as low as I would go without plates or lower shock cam bolts.