Drag5.0mustang

How's everyone doing!


Do you really have to use a fuel line disconnect tool when changing your fuel filter ? , i have the filter already i just dont want to run to the auto store to buy the tool. (too far)
I really wanted to get it done today.
but if you HAVE to have it then thats fine.

Thank you,

Xemeth

You can use a flathead screwdriver to push back the tabs on the fuel line, but it's rediculously frustrating and you risk damaging the line.

Just buy the tool. Don't make a simple job into a nightmare.

Timspony

+1, buy the tool!

Drag5.0mustang

ok np thanks alot guys!

Spilotro

I have also heard about doing it with flatheads, but it is always followed by "if you're good". Don't do it, the tool is under $10.

mustang_pa

I got it off without the tool but never again will i do it. I ended up getting it off with some force and got gas all in my eyes. Not a good day at the emergency room. Get the tool, please.

Spilotro

Don't be a tool, get the tool! lol sorry, corny joke

Big Top Gt

If you're close to Coral Springs, I have the tool you can borrow, dude.

Drag5.0mustang

(big top gt)

Thanks alot for the offer but your to far away and the tool is super cheap, Im going to go buy the tool later today. =)

Thanks every one for the posts!