4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Too Lean??

Thread Tools
 
Search this Thread
 
Old 06-05-2009, 12:58 PM
  #1  
lilcrate
4th Gear Member
Thread Starter
 
lilcrate's Avatar
 
Join Date: May 2009
Location: MO
Posts: 1,030
Default Too Lean??

All of my mods should be in my signature, i am thinking about getting a throttle body and plenum, would that make my care run too lean? I dont have any fuel mods and have almost every air mod there is, also I have a tuner but not sure how to do a custom tune to make it run more rich. Any help is greatly appreciated.
lilcrate is offline  
Old 06-05-2009, 01:05 PM
  #2  
Blownsvt
5th Gear Member
 
Blownsvt's Avatar
 
Join Date: Jul 2006
Location:
Posts: 2,407
Default

You should be fine. You will probably want to get a tune done just to add some fuel in certain areas but you will be fine.
Blownsvt is offline  
Old 06-05-2009, 02:20 PM
  #3  
lilcrate
4th Gear Member
Thread Starter
 
lilcrate's Avatar
 
Join Date: May 2009
Location: MO
Posts: 1,030
Default

so should i get a 75mm or 70mm for an NA stang?
lilcrate is offline  
Old 06-05-2009, 02:25 PM
  #4  
03GT5spd
 
03GT5spd's Avatar
 
Join Date: May 2009
Location: california
Posts: 10
Default

dude i have the same issue i have a 03 GT i have stage 2 clutch, short thro, under drive pulleys, cold air intake, 75mm trick flow throttle body, 75mm trick flow upper plenum and a diablo pradator tuner and flowmaster exhaust im wondering if my injectors are holding me back to i think we are both ok im gunna just bump up my fuel a lil bit just to be safe untill i go get a air fuel meter
03GT5spd is offline  
Old 06-05-2009, 02:44 PM
  #5  
black35th
4th Gear Member
 
black35th's Avatar
 
Join Date: Jun 2007
Location: Ohio
Posts: 1,996
Default

Originally Posted by lilcrate
All of my mods should be in my signature, i am thinking about getting a throttle body and plenum, would that make my care run too lean? I dont have any fuel mods and have almost every air mod there is, also I have a tuner but not sure how to do a custom tune to make it run more rich. Any help is greatly appreciated.
Originally Posted by 03GT5spd
dude i have the same issue i have a 03 GT i have stage 2 clutch, short thro, under drive pulleys, cold air intake, 75mm trick flow throttle body, 75mm trick flow upper plenum and a diablo pradator tuner and flowmaster exhaust im wondering if my injectors are holding me back to i think we are both ok im gunna just bump up my fuel a lil bit just to be safe untill i go get a air fuel meter
Both of you are fine. The factory tune will make the proper adjustments if you are running lean or rich. Just disconnect your battery when you install the TB/Plenum so that your computer can relearn the new fuel trims with your new found air.
black35th is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jb145700
4.6L V8 Technical Discussions
9
08-21-2022 06:37 AM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
firecoyote
S550 2015-2023 Mustang
28
09-27-2015 02:37 PM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
timeformiller44
4.6L (1996-2004 Modular) Mustang
4
08-26-2015 12:03 PM



Quick Reply: Too Lean??



All times are GMT -5. The time now is 09:23 AM.