what to do next?
07-13-2009, 05:06 PM
#1
Thread Starter
Join Date: Jul 2009
Location: Kansas
Posts: 2
what to do next?
Im a 18 yr old kid with 98 gt 5 speed and have the basic bolt on upgrades. exhuast, rear gears, air intake, short shifter, stage 1 clutch.
i want to start working on the motor. i was thinking about PI heads new intake and throtle body. would that be worth the money and while i have all that off is there anything else i should do?
just wanting some of your suggestions and help
i want to start working on the motor. i was thinking about PI heads new intake and throtle body. would that be worth the money and while i have all that off is there anything else i should do?
just wanting some of your suggestions and help
07-13-2009, 07:06 PM
#2
2nd Gear Member
Join Date: Jun 2008
Location: Illinois
Posts: 286
if ur going to do heads u might as well go with fox lake or patriot heads(cheaper) but thats gonna run u some money unless u do it urself. id say save up for a set of those heads and get a PI intake and a new plenum and TB. Stock PI heads can be found cheaply but if u get them at least get those ported and get better cams. Again im sure money is an issue but if ur gonna do it do it right
07-13-2009, 07:27 PM
#3
3rd Gear Member
Join Date: Jan 2007
Location: pa
Posts: 613
yeah i agree. id save up for an engine build.
im done with mods untill i get the new engine. im thinkin about a tune before then though to get a little more power out of it for now
im done with mods untill i get the new engine. im thinkin about a tune before then though to get a little more power out of it for now
Last edited by mrxr250rider; 07-13-2009 at 07:34 PM.