cobra brake question
i just orderd a set of the cobra calipers im assuming i now have to buy the cobra rotors to go with it
|
Yes you need new rotors, the cobras/bullitt/mach 1 use 13" rotors.
I don't even remember what the stock GT/v6 uses, but it really isn't enough to get the job done thats for sure. |
You'll need the banjo bolts and you should go with SS brake lines.
Lynn |
do i have to order brackets for the rear callipers to fit?
and i got the bolts and the lines |
If your ordering Cobra rear rotors yes you have to get a Cobra Caliper Mounting bracket. All rear Mustang Calipers are the same (V6,GT, and Cobra) only the bracket is different
|
so its useless to buy the "cobra rear callipers"? since they are all the same?
|
Yes it is a waste of $
|
Originally Posted by ride4lyfe
(Post 6396595)
so its useless to buy the "cobra rear callipers"? since they are all the same?
Cobra brakes http://www.buyfordracing.com/shop/co...cts/2320R.jpg& You can clearly see it in the front of the caliper. The GT brakes don't have the extra beefy bracket part on the brake bracket. http://img.photobucket.com/albums/v5...99281685_0.jpg So in essence they are different. Lynn |
But that part is on the Bracket. I said the pysical caliper on all 3 are the same
Then in essence they are the same:icon_razz: |
All times are GMT -5. The time now is 09:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands