TECH: Gears? The Know-All to 96-04 Gear Questions
Anyone interested in doing a complete write up on gears? How they affect the T-45 tranny versus the 3650, early 4.6 and 99+ 4.6?
Someone can either do a complete write-up or everyone can contribute small bits of CORRECT info. I would just do it myself but I fear not everyone will agree with my opinion on gears... |
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
I just posted this one. Does it help? My gear posting.
|
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
Good info. I will keep that linked in here for people to look through, thanks!
|
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
I would be interested in ready a post on how gears differ in auto vs. manual trannys
if any1 could help i would apreciate it |
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
Not sure if this thread is open to questions but I was just wondering if I get 4.10 gears for my 01 auto GT will I have to buy a tuner also or will I be fine without a tuner? I have no other mods besides flowmasters. I need all the information on this question I could possibly get so please throw in your 2 cents.
|
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
you will need a tuner or a speedcal to adjust your spedo after the gears are in
|
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
ORIGINAL: 01BlackGT Not sure if this thread is open to questions but I was just wondering if I get 4.10 gears for my 01 auto GT will I have to buy a tuner also or will I be fine without a tuner? I have no other mods besides flowmasters. I need all the information on this question I could possibly get so please throw in your 2 cents. |
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
Just throwing out a quick tip....
Everyone says....you get 3.73's and you'll regret it.......well, I am living proof. My 3.73's aren't enough, but I'm not paying for a swap! BTW...I would get 4.30s if I did it again! |
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
ORIGINAL: JonBeast Just throwing out a quick tip.... Everyone says....you get 3.73's and you'll regret it.......well, I am living proof. My 3.73's aren't enough, but I'm not paying for a swap! BTW...I would get 4.30s if I did it again! |
RE: TECH: Gears? The Know-All to 96-04 Gear Questions
Eh, I'mreally satisfied with 373's. 410's would be too annoying to drive with on the highway with the tranny I have. I have said this a billion times......for those with the newer tranny you should get the 410's and the older style like mine should get 373's.:eek: That is of couse if you actually care about how high your rpm's will be on the freeway. If not then get 4.56's! LOL
|
All times are GMT -5. The time now is 12:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands