When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I would think that because that are flanged and tapered that they would require the clip as well as the correct hosing as it is shaped to fit the nipple exactly.
my hose clamp has held up for over a year so far..
I still couldn't get it on there, so I used heater hose and a clamp. I had to use a longer length that the original due to the hose wanting to kink when it made the 90 degree turn.
Let it kink. As long as it doesn't completely stop the flow. The kink will take the place of the restrictor that is inside of the stock hose. Without the restrictor you have a good chance of blowing your heater core which isn't fun to replace.
Let it kink. As long as it doesn't completely stop the flow. The kink will take the place of the restrictor that is inside of the stock hose. Without the restrictor you have a good chance of blowing your heater core which isn't fun to replace.
What resistor? Wont this cause a back up or deficiency is the rest of the system?