The chance of pressed gears?
#5
oh how i could hope.. I wanna do hi-techs stage 2s, hoping for a nice sound, decent hp gain.. not sure wat kinda hp gain i will it.
http://hitechmotorsport.com/store/in...ducts_id=43789
almost worth it to buy the sprocket kit just incase..
also other main concern is the angle or degree i guess. Bc i have no idea how to do that.. Hell im going to try to install them with out knowing what to do.. By following a guide =/
http://hitechmotorsport.com/store/in...ducts_id=43789
almost worth it to buy the sprocket kit just incase..
also other main concern is the angle or degree i guess. Bc i have no idea how to do that.. Hell im going to try to install them with out knowing what to do.. By following a guide =/
Last edited by UmX; 10-25-2009 at 09:59 PM.
#7
Obviously i dont know if i have a romeo or windsor i wouldnt have asked if i did..
And i went by wat jayc said..
#8
windsors are 99-Mid 01 so you had a possibility it was.
The cam covers and single bolt tensioner is what gives it a way.
happy camming
#9
Do u know if the hi-techs have to be set like degree or can u just put them in..
#10
Factory cam gears are known for being up to 5* off. Does HiTech offer cam gears that are in spec with their cams? (I thought I remember reading they did.) Technically no, you don't have to degree your cams but I would consider it. Or at least get the their cam gears to.
You never know how far off the your cams will be if you try and install them straight up.
You never know how far off the your cams will be if you try and install them straight up.