Reeff91

I have a 1997 short block that im going to build its in pretty good shape my plan is to bore it .020 over and get different pistons and rods. then do a pi swap with hi-tech stage 2's. my question is when i go to order pitons what would be a good compression ratio to have and dish sizes and with those cams will they hit my pistons? thanks

Frostbitten

you plan on staying n/a or doing a blower? To be safe, I would choose something that makes the same compression as stock or a little less if your not sure on the plans for it

Reeff91

my plan is to stay n/a my goal is to get somewhere close to 300rwhp