01BlackGT

I went with the H&R Sport Springs instead of the Eibach pro kit because I talked to many people on other mustang sites and everyone of them said they were disappointed with their Eibachs. A few of them had sold their Eibachs for the H&R Sport Springs and were very happy with the H&R's. Just my $0.02. I know its not much help I am just warning you to do some research on different springs before you buy them.

dobry

I chose Pro-Kit ( not installed yet) over H&R because of the price and because Eibach is more specific about their products regarding application. They differentiate springs by year and wheter it is hardtop or convertible. I just did not trust other manufacturers who advertise their springs to fit 79+.

01BlackGT

http://www.stangsuspension.com/store...?idproduct=145

I made sure it would fit my car. I wouldnt of bought them if I had any doubt about them fitting. Not argueing just showing that they specify years just as much as Eibach I believe. I could be wrong about Eibach year specifications so if I am then let me know.

JonBeast

You mean an Eibach Pro-Kit (lowers ~1-1.5")
OR
Eibach Sportlines (lowers~1.5-2.5")
OR
Eibach has a Drag Launch Kit too.....

dobry

I`m not an expert either. This is how Eibach differentiates the springs they sell:

Part # Description Prokit/Sportline Drop F Drop R
3510.140 79-93 Mustang & Cobra V8 Prokit 1.2" 1.0"
3510.140 94-04 Mustang Coupe V8 no IRS Prokit 1.5" 1.5"
3510.140 94-98 Mustang Cobra no IRS Prokit 1.5" 1.5"
3510.140 99-04 Mustang Convertible V6 Prokit 1.1" 1.1"
3514.140 83-93 Mustang Convertible V8 Prokit 1.2" 1.0"
3518.140 94-04 Mustang Coupe V6 Prokit 1.5" 1.5"
3518.140 87-93 Mustang V6 Prokit 1.2" 1.0"
3530.140 94-98 Mustang Cobra Convertible Prokit 1.3" 1.4"
3530.140 94-04 Mustang Convertible V8 no IRS Prokit 1.3: 1.4"
3531.140 94-98 Mustang Convertible V6 Prokit 1.5" 1.5"
3590.140 99-04 Mustang Cobra ($15 extra) Prokit 1.4" 1.4"
3590.140 99-04 Mustang Cobra Convertible ($15 extra) Prokit 1.5" 1.5"
35101.140 05+ Mustang V8 Prokit 1.3" 1.4"
35100.140 05+ Mustang V6 Prokit 1.3" 1.4"
4.1035 79-93 Ford Mustang / Cobra Coupe V8 Sportline 1.7" 1.5"
4.1035 94-04 Ford Mustang Coupe V8 no IRS Sportline 2.0" 1.8"
4.1035 94-98 Ford Mustang Cobra Coupe Sportline 2.0" 1.8"
4.10135 05+ Mustang V8 Sportline 1.6" 2.0"
4.10035 05+ Mustang V6 Sportine 1.6" 2.0"

4ZZS

I am considering the Eibach Pro-Kit for my 2002 GT convertible. I think the 1.3" & 1.4" drop will be pretty good, as I'd be concerned about lowering it much more than that.
Is the Pro-Kit an easy self-install?
Any concerns I should have about them?
When I go to an 18" wheel will there be any problems?
Thanks for any help.
Ken

Shawn02GT

springs are very easy to install, and yes you'll be able to run 18s with the prokit.

4ZZS

Thank you. This just moved up on my "TO DO" list.
Ken

01BlackGT

Put my H&R's on yesterday and it wasnt as difficult as I thought it was going to be. Took about 3-4 hours for the install. I will be posting before and after pics within the next day or so.

StngPshr03

What excatly do you need to install the springs your self. Do you need any kind of special tools?