4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

PCV Delete?

Thread Tools
 
Search this Thread
 
Old 02-20-2010, 04:02 PM
  #1  
sikblckpny
Thread Starter
 
sikblckpny's Avatar
 
Join Date: Mar 2008
Location:
Posts: 36
Default PCV Delete?

Will deleteing both my pcv's and runnings breathers cause me to need a re tune?

I currently have the stock pcv set up and I had too much crankcase pressure and blew the oil dipstick out last time i had the car dyno tuned.


Thanks
sikblckpny is offline  
Old 02-20-2010, 04:05 PM
  #2  
a_penquin
4th Gear Member
 
a_penquin's Avatar
 
Join Date: Jul 2009
Location: GA
Posts: 1,022
Default

Sounds like one or both pcv valves failed to me, I would just replace the valves and try again.
a_penquin is offline  
Old 02-20-2010, 04:18 PM
  #3  
sikblckpny
Thread Starter
 
sikblckpny's Avatar
 
Join Date: Mar 2008
Location:
Posts: 36
Default

Thats what i was gona try doing, but i like the look of running breathers instead...

But if it will cause me to need to get the car re tuned then i wont...
sikblckpny is offline  
Old 02-22-2010, 07:59 AM
  #4  
00blk4.6
 
00blk4.6's Avatar
 
Join Date: Feb 2010
Location: N C
Posts: 20
Default

im thinkin about doint the same with my car. i did this on my v6 due to the bad valve cover design that through oil into the pcv, it ran the same. i blieve as long as u plug all the holes u should be fine
00blk4.6 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM
DtRockstar1
Mustang Videos
0
09-27-2015 07:46 PM
Camster
4.6L (1996-2004 Modular) Mustang
0
09-10-2015 11:18 AM



Quick Reply: PCV Delete?



All times are GMT -5. The time now is 12:26 PM.