Wrong Rear Shocks?
#1
Wrong Rear Shocks?
I've been looking for shocks for my 2000 Mustang Convertible, I went to an auto parts store and bought some Monroe shocks and when I got home I checked to see if they were right (I compared them side by side with the original motorcraft one) and to my surprise the Monroe ones were shorter, So I returned them and went to the Ford Dealer
At the Ford dealer I gave them my VIN and ordered the shocks, When they came in they were also shorter then the originals and they were full metal instead of having a plastic cover. I looked up the part number 5U2Z-18V125-VJ and it comes up 98-02 4.6l Shock..
So anybody run into this or know if the new shocks will work?
there about a 1/2" shorter than the originals (they look fully extended to)
At the Ford dealer I gave them my VIN and ordered the shocks, When they came in they were also shorter then the originals and they were full metal instead of having a plastic cover. I looked up the part number 5U2Z-18V125-VJ and it comes up 98-02 4.6l Shock..
So anybody run into this or know if the new shocks will work?
there about a 1/2" shorter than the originals (they look fully extended to)
#4
Consider that someone might have put the wrong shocks on the car in the past?
Also there could have been an engineering change and Ford shortened the shock a little?
Is your car lowered? If so the shorter shock will work in your favor
Also there could have been an engineering change and Ford shortened the shock a little?
Is your car lowered? If so the shorter shock will work in your favor
#6
Car is not lowered, I am thinking I will be fine because 1/2" difference is at full extend, which rarely happens
Thread
Thread Starter
Forum
Replies
Last Post
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM