Window fell off track
#1
2nd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Baytown-League City-Houston,Texas
Posts: 285
Window fell off track
My driver side window fell off track, Nothing happens when i try to roll it up but when i push the down button it clicks, like the motor still works. I pulled the door panel and i can see the two bottom tracks off. i can slide it back and forth but i cant even force the window up....Please help.
#3
2nd Gear Member
Thread Starter
Join Date: Sep 2006
Location: Baytown-League City-Houston,Texas
Posts: 285
Im posting this for anyone in the future. After searching through threads online....
Try This,
Bang the Door panel Fonz style to make the window come up
Slam the Door to make the window come up
Hold the Up position and slam the Door.
Truly Amazing YES THIS WORKED!!!!!!!!!!!!!!
Wouldnt do anything going up, just clicked when i held down, Im still in Shock that this actually worked
Try This,
Bang the Door panel Fonz style to make the window come up
Slam the Door to make the window come up
Hold the Up position and slam the Door.
Truly Amazing YES THIS WORKED!!!!!!!!!!!!!!
Wouldnt do anything going up, just clicked when i held down, Im still in Shock that this actually worked
#5
same but got it up....do i need rivets for this?
saw another thread where I was told to pull a FONZ....well I hit by the speaker while pushing the up button and finally got it to work...... it was rolling up crooked something awful, motors good, switch is good, etc.
I was getting ready to take the door panel off, but looked on here first. There looks like some white sheeting on the inside of the door covering access to the track...... how do I take that off?
one post said I needed to get a new rivet and gun it in?
I don't have a rivet gun, just basic tools.
can anyone help? thanks!
I was getting ready to take the door panel off, but looked on here first. There looks like some white sheeting on the inside of the door covering access to the track...... how do I take that off?
one post said I needed to get a new rivet and gun it in?
I don't have a rivet gun, just basic tools.
can anyone help? thanks!
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM