Help!!
In the middle of changing my clutch and the top passenger bellhouseing bolt is stuck. Broke 3 sockets and my irwin stripped bolt tool. Last one to go. Any ideas?
|
It is easier if you tilt the engine downward to get the Top bolts out. I like to put a ratchet strap on the engine and make the tail-shaft of the trans point down. Or the more work way is to remove the intake and the bolts will be really easy to get at from the top
|
I removed the tail shaft cross member and lowered it with a jack to get at the bolt
|
If its that tight than heat the bolt up and use a 1/2 inch impact.
|
I did everything but heat. Rode the bike to the auto store and bought a bought another Bolt stripping tool to replace the one I stripped. Said a prayer and gave it one last shot and it broke lose :-)
|
I guess we know which bolt ain't goin back in that trans haha
|
Originally Posted by WhiteFoxGT
(Post 7035877)
I guess we know which bolt ain't goin back in that trans haha
|
All times are GMT -5. The time now is 01:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands