GhostRider02GT

I do not know what flywheel this is. It is a Ford OE 11" 8 bolt and I am guessing steel as it feels pretty heavy unless I have just turned into a p***y recently. I ordered this 2.5+ years ago and couldn't use the kit on the GT, obviously because of the 8 bolt flywheel. Now I need to know what it is

6E31-556 handwritten on the flywheel
YR3E-AA stamped on the flywheel
1N65N etched into the flywheel
102079000 etched into the flywheel
Ford logo etched into the flywheel

pictures...













Let me know whatever ideas you may have about how to identify this sucker.

cliffyk

Looks like a stock 8-bolt nodular iron wheel to me--with that surface finish I would be very surprised if it were steel...

GhostRider02GT

Sounds good to me, I know I couldn't tell the difference. I know I specified steel as well as 6 bolt whenever I ordered it, but they screwed up the 6 bolt part, its just as easy to screw up the material too.

So what vehicles did these come on?

BraMas

they only come on 8 bolt crank mustangs/cobra's
the whole Ford Part # should be YR3E-6375-AA

GhostRider02GT

I under stand that, but I thought 99/01 cobras had 6 bolt cranks, GT's had 6 bolt cranks, auto Mach's had 6 bolt cranks, and 5 spd Mach's had 8 bolt cranks. 03/04 Cobra's had aluminum flywheels, so I am guessing this would go on a 5 spd Mach? Thats more or less what I was asking which models and sub models did they go on.

FYI none of what I post in bold is fact, this was my understanding, but I don't know anymore.