shadybiz11

I thought I would share with you. I have a 2002 GT with a Wolfe roll cage in it. At 6'-4" tall, 300 lbs. I couldn't get the seat back far enough in my recently purchased mustang. I had to cut the horizontal seat belt support bar out of the car so I could get the seat moved back far enought for my long legs.

The problem now was being able to replace that horizontal support in my car so I could have my shoulder belts and have the car NHRA legal. After searching and calling several hot rod and race shops in the Wichita, KS area I found The Hot Rod Underground. Kevin made a new horizontal support for my roll cage. He also can build a complete, partial or make chassis modifications. If your looking to build a drag car, you should visit his web site. www.thehotrodunderground.com

uberstang1

90% of all drag setup roll cages are custom built in the first place,as pre-fabbed cages generally don't work for everyone as you stated.