Power drivers seat - MustangForums.com



4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Reply
 
 
 
Thread Tools Search this Thread
Old 09-23-2013, 04:34 PM   #1
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default Power drivers seat

Drivers seat doesn't work, both lumbar and seat doesn't work. The fuse is good. Any ideas?
Is there away I can moe the seat manually?
The98Stang is offline   Reply With Quote
Old 09-23-2013, 08:09 PM   #2
TheDullahan
1st Gear Member
 
TheDullahan's Avatar
 
Join Date: May 2013
Location: Ohio
Posts: 63
Default

can you hear any of the motors trying to turn?
TheDullahan is offline   Reply With Quote
Old 09-23-2013, 10:04 PM   #3
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default

Quote:
Originally Posted by TheDullahan View Post
can you hear any of the motors trying to turn?
No nothing.
The98Stang is offline   Reply With Quote
Old 09-24-2013, 08:54 AM   #4
AzPete
4th Gear Member
 
AzPete's Avatar
 
Join Date: Aug 2008
Location: Panama City, FL
Posts: 1,214
Default

Sounds like it is unplugged or something. The motors for moving the seat are different than the air pump for the lumbar.....if my old memory is correct. Look into the wiring and replace the fuses just in case.....

Ford has not separated the motors for sale....always had to buy a complete seat rack. Salvage yard is a good start if the seat is bad.
AzPete is offline   Reply With Quote
Old 09-24-2013, 09:23 AM   #5
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default

Quote:
Originally Posted by AzPete View Post
Sounds like it is unplugged or something. The motors for moving the seat are different than the air pump for the lumbar.....if my old memory is correct. Look into the wiring and replace the fuses just in case.....

Ford has not separated the motors for sale....always had to buy a complete seat rack. Salvage yard is a good start if the seat is bad.
was thinking that too. I'll check the plug.

tnx
The98Stang is offline   Reply With Quote
Old 10-07-2013, 07:34 AM   #6
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default

Fuse is good, looked under the seat and it's plugged in. Any other ideas?
The98Stang is offline   Reply With Quote
Old 10-08-2013, 04:35 PM   #7
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default

Doesn't anyone know the color combination for the wiring harness? I'd want to check and see if I'm getting power to the seat. I need to know which color is ground and what's hot.
Thanks in advance
The98Stang is offline   Reply With Quote
Old 10-08-2013, 05:37 PM   #8
AzPete
4th Gear Member
 
AzPete's Avatar
 
Join Date: Aug 2008
Location: Panama City, FL
Posts: 1,214
Default

Not sure on the colors but you can check for power at the switch easy enough.
AzPete is offline   Reply With Quote
Old 10-08-2013, 10:49 PM   #9
Blue96GT
 
Join Date: Oct 2013
Location: washington
Posts: 10
Default

I installed a set of 00 GT seats with lumbar in my 96 with a 2 wire set up. If memory serves me correctly there are 4 wires. 2 green ground, one black power and a brown with a strip. Check to make sure the black wire on the car side it getting power if it is, then check the seat side to make sure its getting power, after that its just a process working your way around the seat connectors. If its not the I would look at the fuses inside the car and under the hood.
Blue96GT is offline   Reply With Quote
Old 10-12-2013, 09:47 AM   #10
The98Stang
Thread Starter
 
The98Stang's Avatar
 
Join Date: Sep 2013
Location: New York
Posts: 11
Default

Quote:
Originally Posted by Blue96GT View Post
I installed a set of 00 GT seats with lumbar in my 96 with a 2 wire set up. If memory serves me correctly there are 4 wires. 2 green ground, one black power and a brown with a strip. Check to make sure the black wire on the car side it getting power if it is, then check the seat side to make sure its getting power, after that its just a process working your way around the seat connectors. If its not the I would look at the fuses inside the car and under the hood.
Thank you. I'll be working on it today.
The98Stang is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
mysterious water leak zsmart Convertible Tech 2 02-29-2016 08:33 AM
Keyhole behind rear seatback wileec The New S550 2015-2017 Mustang 4 09-11-2015 10:16 AM
Opinions on Recaro Seats???? Mr. D Off Topic 15 09-11-2015 02:29 AM
alternator. so hot will burn your hand on 2004 3.9 v6 mrmrultimate Texas Regional Chapter 2 09-10-2015 09:43 AM
Steeda & Nitto Tire Testing NT555 G2 - Great Photos Inside!! [email protected] Steeda Autosports 0 09-08-2015 11:50 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 03:03 AM.