98 Lowering Tips
 

I plan on lowering my 98 Mustang GT come spring time and was wondering whats a good set of springs, how much they cost, and where abouts i can purchase them (online). Thanks</P>

98 Lowering Tips
 

.<edited><editID>hotrodman</editID><editDate>37986.5311342593</editDate></edited>

98 Lowering Tips
 

i went with the tokico illumina suspension, springs and adjustables, with steeda caster camber plates . my 98 was sitting on 18x9 saleens with 275/35/18 on all four corners. looked mean and handled like a true sports car

98 Lowering Tips
 

Go with the Eibach Progressive rate springs. I got them and I'm very happy with them. You might want to think about getting the Steeda X2 ball joints to match the springs. If you don't in about a year you'll be replacing your stock ball joint.

98 Lowering Tips
 

Lots of LA'ers in here yay! I got eibach prokits on 16 inchers you can look at my profile in the pics. I wish i had larger rims/bigger tires/or it was lower <IMG src=smileys/smiley8.gif border="0">. Well I also have a bolt on my x-pipe thats only a few inches off the ground, dragging road kill is not thrilling haha.<edited><editID>mabguru</editID><editDate>37980.4646412037</editDate></edited>

98 Lowering Tips
 

my h-pipe hangs low without the springs so im affraid if i put springs on my carit will scrape bad!!!

98 Lowering Tips
 

Just do it. Worry about that if the problem occurs. You might just have to tighten the bolts on the h-pipe. I had to same problem.

98 Lowering Tips
 

how hard is it to install springs????

98 Lowering Tips
 

Not to hard at all. But if you don't know what your doing you might what to get soemone who does. Because the springs are under alot of pressure, and if you don't take them off right it will come flying out, and cause you some serious injury.

98 Lowering Tips
 

.<edited><editID>hotrodman</editID><editDate>37986.5314236111</editDate></edited>