1995 Mustang GT- Cobra Brake Upgrade
#1
1995 Mustang GT- Cobra Brake Upgrade
1995 Mustang GT, 172,000 miles
I am preparing to continue my upgrade to Cobra brakes. Last year, while rebuilding the rear axle, I swapped out the stock brakes for Cobra parts. Now, it's time for the front. (I know the car is a 5.0, not 4.6, but it's SN95 so I'm posting threads in both sections.)
I don't want some aftermarket kit that takes special pads. The next time I have to do brakes, I want to be able to walk into any parts store and ask for Cobra pads and rotors.
I had collected some notes on this upgrade, but I've since lost them and I need to get my list back together so I can round up the right parts.
From what I recall, I need:
Hoses
Calipers + pads
Caliper brackets
Rotors
Anything else?
I am preparing to continue my upgrade to Cobra brakes. Last year, while rebuilding the rear axle, I swapped out the stock brakes for Cobra parts. Now, it's time for the front. (I know the car is a 5.0, not 4.6, but it's SN95 so I'm posting threads in both sections.)
I don't want some aftermarket kit that takes special pads. The next time I have to do brakes, I want to be able to walk into any parts store and ask for Cobra pads and rotors.
I had collected some notes on this upgrade, but I've since lost them and I need to get my list back together so I can round up the right parts.
From what I recall, I need:
Hoses
Calipers + pads
Caliper brackets
Rotors
Anything else?
Thread
Thread Starter
Forum
Replies
Last Post
UltraBlue91'
5.0L (1979-1995) Mustang
4
01-20-2016 12:26 PM