MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   4.6L (1996-2004 Modular) Mustang (https://mustangforums.com/forum/4-6l-1996-2004-modular-mustang-7/)
-   -   Noisy Transmission after clutch change (https://mustangforums.com/forum/4-6l-1996-2004-modular-mustang/734665-noisy-transmission-after-clutch-change.html)

oblivion7986 06-12-2018 11:16 PM

Noisy Transmission after clutch change
 
I had changed the clutch, flywheel, pressure plate, and throwout bearing and ever since then ive had a rattling noise coming from the tranny when i let out the clutch. The noise stops completely when the clutch pedal is depressed but i cant quite pinpoint the source of the noise.. if anyone has some input on what it could be that would be great!
The noise started after i replaced the clutch and such.

WhiteFoxGT 06-13-2018 06:46 AM

well, id start with the obvious and check the clutch fork/throwout bearing. Pull the dust cover off the side and start the car. peek in thru that hole and look/listen for the culprit

WhiteFoxGT 06-13-2018 06:48 AM

could also be bearings/gear mesh inside the trans. when the clutch is depressed it allows the trans to stop spinning hence the noise going away. however without being there this is all just speculation


All times are GMT -5. The time now is 10:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands