4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Noisy Transmission after clutch change

Thread Tools
 
Search this Thread
 
Old 06-12-2018, 11:16 PM
  #1  
oblivion7986
Thread Starter
 
oblivion7986's Avatar
 
Join Date: Jun 2018
Location: PA
Posts: 2
Default Noisy Transmission after clutch change

I had changed the clutch, flywheel, pressure plate, and throwout bearing and ever since then ive had a rattling noise coming from the tranny when i let out the clutch. The noise stops completely when the clutch pedal is depressed but i cant quite pinpoint the source of the noise.. if anyone has some input on what it could be that would be great!
The noise started after i replaced the clutch and such.
oblivion7986 is offline  
Old 06-13-2018, 06:46 AM
  #2  
WhiteFoxGT
Resident Ford Troll
 
WhiteFoxGT's Avatar
 
Join Date: Jul 2006
Location: Delaware
Posts: 6,717
Default

well, id start with the obvious and check the clutch fork/throwout bearing. Pull the dust cover off the side and start the car. peek in thru that hole and look/listen for the culprit
WhiteFoxGT is offline  
Old 06-13-2018, 06:48 AM
  #3  
WhiteFoxGT
Resident Ford Troll
 
WhiteFoxGT's Avatar
 
Join Date: Jul 2006
Location: Delaware
Posts: 6,717
Default

could also be bearings/gear mesh inside the trans. when the clutch is depressed it allows the trans to stop spinning hence the noise going away. however without being there this is all just speculation
WhiteFoxGT is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fenderbass146
4.6L (1996-2004 Modular) Mustang
0
01-28-2013 01:44 PM
fergmonsta
V6 (1994-2004) Mustangs
9
01-14-2008 02:59 PM
ChevelleStang
5.0L (1979-1995) Mustang
20
07-11-2007 09:28 PM
2003GTMustang
4.6L (1996-2004 Modular) Mustang
12
10-31-2006 05:45 PM
MustangChris04
4.6L (1996-2004 Modular) Mustang
4
06-05-2006 08:28 PM



Quick Reply: Noisy Transmission after clutch change



All times are GMT -5. The time now is 09:46 PM.