mach368

I have a 2003 mach 1 torch red and i want to put a supercharger on it.So far i only know of two and that is one offered by procharger that works with the shaker and one by vortech that doesnt work with the shaker but im told the will offer a kit later on that will hook the supercharger and shaker together.my question is what company do you guys think is the better.

callmecobra

i think ive seen a turbo kit for the mach 1. ide do that instead.</P>

Eddie

Don't go higher than 5-6psi..even with thatI thinkyou will need to use some octane booster with93. <edited><editID>Eddie</editID><editDate>37997.7903356481</editDate></edited>

Eddie

http://www.mm-inet.com/550076.shtml

callmecobra

man, 5-6 psi is nothing on that motor, and he will never need octane boost. unless he builds the bottum end, and plans on running some serious boost. but still, there are guys running 18-20psi pump gas.

Eddie

Man I'm way off. <IMG src=smileys/smiley8.gif border="0">I thought with a 10:1 engine you couldn't run much boost. <IMG src=smileys/smiley11.gif border="0"></P><edited><editID>Eddie</editID><editDate>37997.8058449074</editDate></edited>

Jugador1

i wouldnt care about keeping the shaker functional...id go vortech</P>

Eddie

I'd keep it functional. But that's just me.<IMG src=smileys/smiley1.gif border="0"></P>

mach368

i got the car cause i love the shaker,and both companys have about 10psi as the safe level of boost.

BLKSTANG9879

If you get the 5.0 mag. They S/c charged one. And keep the shaker. Look it up.