MichelleBeMyGT

I have the pillar pod and an Air Fuel Ratio Gauge... What all is needed to install the air fuel ratio gauge? I have no idea. Any guides to this? I have searched the forums..

racer02GTstang

well.. it comes with directions... but one of the wires go to ground, one goes to power... and one goes to one of the wires on the 02 sensor or PCM.

Sonic3v

Id go for the PCM, ive always had probs hooking it to the o2, plus thats a goot amount of wire to run when you can just keep it all inside the cab.

MichelleBeMyGT

Ok... Thanks for the help with this

I bought the gauge and pod from a friend who wrecked his mustang. Someone else hooked it up and he just took it out. So I pretty much don't have a clue of where it needs to be hooked up. I need to find out which pcm wire it is...

racer02GTstang

hmm.... you will have to check a diagram for that.. if you want i can tell you the directions from my sheet if i can find it for which wire is which.