Need help finding a wire coming from the TPS, asap
12-30-2005, 09:51 PM
#1
2nd Gear Member
Thread Starter
Join Date: Apr 2005
Location:
Posts: 342
Need help finding a wire coming from the TPS, asap
Hey fellas
almost got my zex dry n20 kit hooked up (I know this should be in pipes boost juice, but i figured maybe one of you guys know where this wire is), all I need to do is hook the white wire from the NMU to the output voltage wire. For the love of god, there are 3 wires coming from the TPS and I have no clue which one is the OVW. I think one wire is black/white, the middle is gray, and the other outside wire is red/green. If someone could point to the right wire I would be thankful.
almost got my zex dry n20 kit hooked up (I know this should be in pipes boost juice, but i figured maybe one of you guys know where this wire is), all I need to do is hook the white wire from the NMU to the output voltage wire. For the love of god, there are 3 wires coming from the TPS and I have no clue which one is the OVW. I think one wire is black/white, the middle is gray, and the other outside wire is red/green. If someone could point to the right wire I would be thankful.
12-30-2005, 10:04 PM
#2
2nd Gear Member
Join Date: Oct 2004
Location: OK
Posts: 268
RE: Need help finding a wire coming from the TPS, asap
take a digital multimeter, set to dc volts
touch red (+) to one of the wires, black (-) to ground
open the throttle
if it changes voltage thats the output voltage
switch wires if not.
(cut and paste from google)
touch red (+) to one of the wires, black (-) to ground
open the throttle
if it changes voltage thats the output voltage
switch wires if not.
(cut and paste from google)
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
