hydraulic throwout bearing
#1
hydraulic throwout bearing
Will the hydraulic throwout bearing from a 2005 and up mustang fit on the 3650 trans from a 2004 and down 3650? I want to put a 5 speed behind the mod motor in my 69 f-100 and the 2005 and up shifter position is not the greatest.
#2
I thought the 05+ had remote shifters, or was that something to do with the automatics in those?
Other than that, I also thought the 3650 was a 3650. In other words, that would work as long as you had the other stuff to go with it (ie hydraulic plumbing etc).
Other than that, I also thought the 3650 was a 3650. In other words, that would work as long as you had the other stuff to go with it (ie hydraulic plumbing etc).
#4
Mcleod makes a hydraulic system for the 99-04 mustangs. About $700. But that's not to say it will work prefectly. I don't know the length of the lines, so you may be able to buy the main components then custom make the lines to fit your application.
#5
It is a "remote" monkey-motion shifter in that it mounts externally to the transmission--still mechanical:
As opposed to the "turret mounted" shifter on our cars:
This is a separate issue from the hydraulic clutch actuation...
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
Offendant
V6 (1994-2004) Mustangs
6
09-23-2015 07:21 PM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM