4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Will a 2000 to 2004 4.6 DOHC cobra engine fit in a 2003 Gt mustang

Old 02-15-2008, 10:41 AM
  #1  
Roush8868
Thread Starter
 
Roush8868's Avatar
 
Join Date: Feb 2008
Posts: 5
Default Will a 2000 to 2004 4.6 DOHC cobra engine fit in a 2003 Gt mustang

Does anyone know if a 2000-2004 4.6 DOHC cobra engine wouldfit and mount up to the stock engine mounts of a 2003 Gt mustang? I would figure a 2003cobra definitly would since the engine is the only real differencebetween thetwo? I was planning on making the swap and was wondering if anyone has done one yet. I plan on also using the T-56 trans. Also would the ECU the new motor comes with be able to clip into the stock one of the 2003 GT? Thanks
Roush8868 is offline  
Old 02-15-2008, 11:35 AM
  #2  
Derf00
Gentleman's Relish
 
Derf00's Avatar
 
Join Date: Feb 2005
Location: AZ
Posts: 13,090
Default RE: Will a 2000 to 2004 4.6 DOHC cobra engine fit in a 2003 Gt mustang

ORIGINAL: Roush8868

Does anyone know if a 2000-2004 4.6 DOHC cobra engine wouldfit and mount up to the stock engine mounts of a 2003 Gt mustang? I would figure a 2003cobra definitly would since the engine is the only real differencebetween thetwo? I was planning on making the swap and was wondering if anyone has done one yet. I plan on also using the T-56 trans. Also would the ECU the new motor comes with be able to clip into the stock one of the 2003 GT? Thanks
Yes on everything except the Wiring Harness for the ECU 2003 Cobra motor is Supercharged so the harness is a little different. Also, be sure to get the driveshaft from the Cobra donor I believe the output shaft on the 6speed is different than the stock GT tranny. Differential Input is the same.
Derf00 is offline  
Old 09-29-2009, 04:03 PM
  #3  
39Willys
 
39Willys's Avatar
 
Join Date: Sep 2009
Location: Ma.
Posts: 2
Default

Is there any info on the differences of the 2003 cobra dohc harness and the 1997 cobra harness? I spoke with the Ron Francis Co. and they have a harness that will allow the engine to run but nothing on the rest of the car, it's really made for a race car or hot rod. I'm wondering how many actuall circuits are fine and if a few could be added along with the 2003 computer to have a fully functional electrical system.

Last edited by 39Willys; 09-29-2009 at 11:51 PM.
39Willys is offline  
Old 09-29-2009, 04:29 PM
  #4  
teej281
4.6L Section Moderator
 
teej281's Avatar
 
Join Date: Nov 2007
Location: South Central PA
Posts: 10,286
Default

Differences from what to what???

GT/03 Cobra: GT's have no supercharger and only single overhead cams vs the cobra which has a supercharger(eaton) and dual overhead cams.

Mach or older cobras/03 Cobra: 03 cobra has lower compression and a supercharger.
teej281 is offline  
Old 09-29-2009, 05:16 PM
  #5  
pcs
4th Gear Member
 
pcs's Avatar
 
Join Date: Jan 2008
Location: yuma, az
Posts: 1,252
Default

you can still use a your gt wiring harness but you have to mod if b/c of the difference in the c.o.p's between a 2v and a 4v engine.
pcs is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor For Sale / Group Buy Classifieds
28
05-26-2022 12:02 PM
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM
01blackgtconv
New Member Area
9
08-14-2015 04:50 PM
daytooday
Motor Swap Section
2
08-11-2015 09:22 AM
01blackgtconv
4.6L (1996-2004 Modular) Mustang
2
08-10-2015 01:25 PM


Thread Tools
Search this Thread
Quick Reply: Will a 2000 to 2004 4.6 DOHC cobra engine fit in a 2003 Gt mustang



All times are GMT -5. The time now is 07:58 PM.