4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Anyone with clutch quadrants come in

Old 06-01-2009, 09:40 PM
  #1  
H0SS302
6th Gear Member
Thread Starter
 
H0SS302's Avatar
 
Join Date: Oct 2006
Location: Texas
Posts: 10,551
Default Anyone with clutch quadrants come in

Ok so I ordered my King Cobra clutch today and a stock cable. Is the best firewall and quadrant going to be the steeda?
H0SS302 is offline  
Old 06-01-2009, 09:46 PM
  #2  
StockD15b
4th Gear Member
 
StockD15b's Avatar
 
Join Date: Oct 2005
Location: Fl
Posts: 1,392
Default

i have the steeda quad. and cable, cable ended up breaking. seems like the quadrant needs to be shimmed a lil more to keep side to side free play down.
StockD15b is offline  
Old 06-01-2009, 09:59 PM
  #3  
2000VertGT
1st Gear Member
 
2000VertGT's Avatar
 
Join Date: May 2009
Location: Florida/Born and Raised West Virginia!
Posts: 127
Default

I have Zoom stage 2, steeda cable, firewall adjuster, and dbl hook quadrant. Here is my opinions:
Steeda Cable - Right now, I'm on my 2nd, the first one gave out on me (Pictures in thread titled "Anyone have this clutch cable" I'm only in my first week of the 2nd one, its nice to be able to adjust it so easily but from what I hear on here they tend to break often.
Firewall aduster - Probably the best thing since individually wrapped cheese. Its really great, no other explanation.
Quadrant - As stated above, it needs some shims to stop the side-to-side motion, I used some hard rubber washers seems to work fine. The quadrant is great, I've had no problems out of it.
Hope this helps, g/l with the quadrant install, its a pretty tight spot, drink a few beers for some patience
2000VertGT is offline  
Old 06-01-2009, 10:03 PM
  #4  
H0SS302
6th Gear Member
Thread Starter
 
H0SS302's Avatar
 
Join Date: Oct 2006
Location: Texas
Posts: 10,551
Default

Its a known fact that you should use nothing but a stock cable.. you guys know that right?

Thanks for the info im gonna order it after I fight this dude on UFC lol
H0SS302 is offline  
Old 06-02-2009, 06:36 AM
  #5  
jmac72187
corner carver
 
jmac72187's Avatar
 
Join Date: Oct 2006
Location: New England
Posts: 4,371
Default

I use the MM quadrant and the Steeda adjuster. I used the Steeda package in the GT and they are pretty much the same thing.
jmac72187 is offline  
Old 06-02-2009, 08:07 AM
  #6  
amoosenamedhank
5th Gear Member
 
amoosenamedhank's Avatar
 
Join Date: Nov 2005
Location: MN
Posts: 4,412
Default

I have UPR for both... the UPR kit didn't come with any shims so you're going to need to find some washers other than that, the kit was fine.

Last edited by amoosenamedhank; 06-02-2009 at 10:32 AM.
amoosenamedhank is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Thunderball
4.6L (1996-2004 Modular) Mustang
15
11-22-2015 11:49 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
MacSerio
5.0L (1979-1995) Mustang
3
09-27-2015 01:05 PM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM
MasterLanMan
4.6L (1996-2004 Modular) Mustang
6
09-13-2015 08:21 PM


Thread Tools
Search this Thread
Quick Reply: Anyone with clutch quadrants come in



All times are GMT -5. The time now is 10:04 PM.