A few pics
06-21-2009, 01:17 AM
#6
2nd Gear Member
Thread Starter
Join Date: Jun 2009
Location: Texas
Posts: 401
93 octane tune with SCT XCAL3 handheld
FRPP Aluminum Driveshaft
Professional Products Typhoon Intake Manifold, Upper Plenum, and Throttle Body
180* Thermostat
MAC Catback Exhaust System
3.73's
About to get a new clutch and a short throw. Using reverse is a bitch, never wants to work. This isn't the first mustang I've driven that is like that. Is that a common problem?
Cause it is. lol
It was already on it when I bought it, they're everywhere , though.
FRPP Aluminum Driveshaft
Professional Products Typhoon Intake Manifold, Upper Plenum, and Throttle Body
180* Thermostat
MAC Catback Exhaust System
3.73's
About to get a new clutch and a short throw. Using reverse is a bitch, never wants to work. This isn't the first mustang I've driven that is like that. Is that a common problem?
It was already on it when I bought it, they're everywhere , though.
06-21-2009, 05:49 PM
#10
2nd Gear Member
Thread Starter
Join Date: Jun 2009
Location: Texas
Posts: 401
H&R Super Sport Lowering Springs
Steeda X2 Balljoints
Steeda Bumpsteer Kit
Upper and Lower Solid Control arms
Tokico HP shocks/struts
Maximum Motorsports Caster/Camber Plates
Maximum Motorsports Strut Tower Brace
Polyurethane Swaybar and Steering Rack Bushings
New/Shorter Swaybar Endlinks with polyurethane bushings
Currently, the isolators in the back are removed, but are getting replaced on Tuesday. They were out from the front too, but I had them replaced. The mechanic thought I only wanted the front done, but I wanted front and rear. I think it looks better without them, but I drive too fast on bumpy roads to not have them in.
Steeda X2 Balljoints
Steeda Bumpsteer Kit
Upper and Lower Solid Control arms
Tokico HP shocks/struts
Maximum Motorsports Caster/Camber Plates
Maximum Motorsports Strut Tower Brace
Polyurethane Swaybar and Steering Rack Bushings
New/Shorter Swaybar Endlinks with polyurethane bushings
Currently, the isolators in the back are removed, but are getting replaced on Tuesday. They were out from the front too, but I had them replaced. The mechanic thought I only wanted the front done, but I wanted front and rear. I think it looks better without them, but I drive too fast on bumpy roads to not have them in.