ENGINE!?!?!?!?
#21
Ok I'll admit that i was wrong and you can make a teksid block handle 2000hp but out of the box it will not handle anywhere near that.
It will be hard to find a cobra making 2000+ hp because that is pro level power and pros don't use 4.6L iron blocks because they are hevier then the aluminum 5.4L gt blocks which are easier to make the power with.
But you have already proven that you can google the **** out of old john so I'm sure you can find someone making 2000hp on a cobra block.
Good luck google boy hope you learn alot more.
You better hurry and call MMR tomorrow and tell them to stop advertising their 1500-2000hp shortblocks because they are made using production cast iron romeo and windsor blocks. And according to you those blocks are going to fall apart at 600 hp. They 1 of the top 10 engine builders in the country you think they would know better.
It will be hard to find a cobra making 2000+ hp because that is pro level power and pros don't use 4.6L iron blocks because they are hevier then the aluminum 5.4L gt blocks which are easier to make the power with.
But you have already proven that you can google the **** out of old john so I'm sure you can find someone making 2000hp on a cobra block.
Good luck google boy hope you learn alot more.
You better hurry and call MMR tomorrow and tell them to stop advertising their 1500-2000hp shortblocks because they are made using production cast iron romeo and windsor blocks. And according to you those blocks are going to fall apart at 600 hp. They 1 of the top 10 engine builders in the country you think they would know better.
Last edited by mustangman281; 06-24-2009 at 03:01 AM.
#22
Funny how you know som much today but didn't know dick last week.
https://mustangforums.com/forum/svt-...t-rebuild.html
https://mustangforums.com/forum/svt-...t-rebuild.html
#23
And MMR uses 04 Cobra blocks in their builds (most of them) which is NOT the same as the 2V block. But I guess MMR doesn't know that they're the same either...I won't tell them if you don't.
#24
*Brand New Cast Iron, current production Romeo or Windsor Block, FULL RACE PREP, de-burred and custom Hone for Chrome faced ringset.
#25
ok enough of the arguing but mustangman281 do u have a cobra or a gt that makes 661 RWHP? if its a gt how did u get it like that? also if i keep my engine a get new internals forged i guess? how much more RWHP will I gain for the time being? also what are some reliable and good brands
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM