4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

400 HP?

Thread Tools
 
Search this Thread
 
Old 07-28-2009, 05:38 PM
  #1  
Diangho
Thread Starter
 
Diangho's Avatar
 
Join Date: Jun 2009
Location: ohio
Posts: 24
Default 400 HP?

is it possible to get at least 400 HP into a 2v motor

if so what am i going to need and how much is it going to cost.

thanks
Diangho is offline  
Old 07-28-2009, 06:13 PM
  #2  
JC316
4th Gear Member
 
JC316's Avatar
 
Join Date: May 2009
Location: DFW, TX
Posts: 1,925
Default

Supercharger and full boltons should do it.
JC316 is offline  
Old 07-28-2009, 06:20 PM
  #3  
a_penquin
4th Gear Member
 
a_penquin's Avatar
 
Join Date: Jul 2009
Location: GA
Posts: 1,022
Default

7500 for a hellion twin turbo, should get you there and then some.
a_penquin is offline  
Old 07-28-2009, 06:47 PM
  #4  
BOSTANG
2nd Gear Member
 
BOSTANG's Avatar
 
Join Date: Jun 2008
Posts: 314
Default

A fist full of dollars.
BOSTANG is offline  
Old 07-28-2009, 08:21 PM
  #5  
99BlackPonyGT
aka 'Negative Nancy'
 
99BlackPonyGT's Avatar
 
Join Date: Jul 2007
Location: Ohio
Posts: 4,839
Default

lts
tb/plenum
stage 1 or 2 cams
supercharger on 8-10lbs
tune

OR

bolt ons + 150 shot with a good tune
99BlackPonyGT is offline  
Old 07-28-2009, 08:31 PM
  #6  
WannaBeGearHead
Go Texas!!!
 
WannaBeGearHead's Avatar
 
Join Date: Jul 2009
Location: Lincoln, NE
Posts: 4,613
Default

Sounds like you have a lot of studying and researching to do before you buy anything. I read somewhere on here that said if you want to know how to get to 500hp and don't know how to get it then your not ready for it. Same kinda deal applies here. 400hp is going to be an expensive goal to reach but if you do it will be sweet!

The full bolt ons and 150 shot will probably be your cheapest choice. Good luck!
WannaBeGearHead is offline  
Old 07-28-2009, 08:35 PM
  #7  
jRock617
2nd Gear Member
 
jRock617's Avatar
 
Join Date: Feb 2008
Location: Boston MA
Posts: 383
Default

Supercharger at 9-10 psi with supporting mods

or

Full bolt on, H/C/I plus a 75 shot.
jRock617 is offline  
Old 07-28-2009, 08:50 PM
  #8  
cobra dreamer
2nd Gear Member
 
cobra dreamer's Avatar
 
Join Date: Jan 2008
Location: ma
Posts: 308
Default

just a blower should get you real close

i have a friend with a 02 and jusr a v1 non intercooled on 10 psi
and a cat back at 15* of timing and he is making 395 very safely
the blower was 2900 bran new !
cobra dreamer is offline  
Old 07-28-2009, 08:51 PM
  #9  
DS002
3rd Gear Member
 
DS002's Avatar
 
Join Date: Sep 2006
Location:
Posts: 936
Default

Too much stuff unless youre going to run nitrous

Our motors blow
DS002 is offline  
Old 07-28-2009, 09:07 PM
  #10  
jRock617
2nd Gear Member
 
jRock617's Avatar
 
Join Date: Feb 2008
Location: Boston MA
Posts: 383
Default

Originally Posted by DS002
Too much stuff unless youre going to run nitrous

Our motors blow
our motors are OK but our 2V heads are limiting.
jRock617 is offline  


Quick Reply: 400 HP?



All times are GMT -5. The time now is 06:55 PM.