2V Trickflow Heads.. anyone..
07-31-2009, 11:43 AM
#11
4th Gear Member
Join Date: Dec 2007
Location: Lafayette, LA
Posts: 1,700
From modularfords.
"Yellow02GTauto"
The 44cc head is very nice.....stock they flow about the same....port each and the 4V will have more flow.......I got mine to flow 263 intake and 214 exhaust...which is damn good for a 2V.....I guess the thing to tell here in the near future is the flow characteristics of the new heads.....my set-up should be a good comparison on how these heads work....every bolt on you can get on a stock 01 cobra short block with ported TFS 44cc heads.......I would be very happy to break the 380hp mark on the stock bore.....but I do have an auto with a high stall......with a larger bore the chambers could be ported and get these puppies to really flow.....but we need to see what they can do off the shelf 1st.....my car goes under the knife on Friday and will be done on Saturday......I will have the numbers posted between Saturday night to Monday night depending on when we finish up........wish me luck...
"ED"
07-31-2009, 03:28 PM
#16
4th Gear Member
Join Date: Apr 2008
Location: New York
Posts: 1,306
man... i wish i didn't just drop 1100 on my pi swap, could have saved a few more bones and bought the trick flow heads 
on a related note: anyone want to buy some pi heads with pi cams for 2000 dollars so i can buy the trick flow ones
, they are ported :O
on a related note: anyone want to buy some pi heads with pi cams for 2000 dollars so i can buy the trick flow ones
, they are ported :O
Last edited by stangalator; 07-31-2009 at 03:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
