When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well, I'm almost 100% positive I'm going to go with a set of ported and polished PI heads for my new build. I just wanted to make sure this was okay. I already have a set of Crower Stage 2 NON PI cams sitting in my garage. Would it be okay to still use these non pi blower cams in the ported/polished PI heads? Also, as long as the heads are romeo (which my non pi's were), my team breed valve covers should bolt right up right? thanks guys
To the best of my knowledge there is a different # of bolts for the valve covers between PI and nonPI.
the bolt pattern for the nonPI heads and PI are exactly the same. I have my nonPI valve covers on my PIm motor now. Engine looks exactly the same as the nonPI did. so awkward.
i was asking during the weekend, while crower was closed jayc, relax man. Poor combo of parts? we'll see how well 500+rwhp through a high stall'd auto can move
i was asking during the weekend, while crower was closed jayc, relax man. Poor combo of parts? we'll see how well 500+rwhp through a high stall'd auto can move