exhaust finally done (pics inside)
#12
thanks
this weekend im gonna try to grab some ground clearance pics. i dont have one from before but it will give some idea.
im just throwing up info that i would have liked to see/know before i did it so other people who are on the fence or curious can know.
this weekend im gonna try to grab some ground clearance pics. i dont have one from before but it will give some idea.
im just throwing up info that i would have liked to see/know before i did it so other people who are on the fence or curious can know.
#16
ahah it just looks like a lot because it was a parking lot and they piled up on the edges.
we have gotten more than that. on bad days throw 4 sand bags in the stang and out the door i go! ahaha
we have gotten more than that. on bad days throw 4 sand bags in the stang and out the door i go! ahaha
#20
i PMed CliffyK about it hanging because he was the one i chatted to before i went with UPR...i may have an exhaust shop cut the "downpipes" and reweld it higher.
pretty much section it then tuck it up higher and since they are at an angle the pipe will also move forward as well, but there is plenty of pipe that fits into the mufflers to compensate for this.
OR cut it halfway down the midpipe then flare the backhalf of the pipe and slip it over the "downpipes" and reweld it.
pretty much section it then tuck it up higher and since they are at an angle the pipe will also move forward as well, but there is plenty of pipe that fits into the mufflers to compensate for this.
OR cut it halfway down the midpipe then flare the backhalf of the pipe and slip it over the "downpipes" and reweld it.
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM