4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Lower Than A Lamborghini (Pics H&R SS)

Thread Tools
 
Search this Thread
 
Old 04-01-2010, 07:24 AM
  #61  
smitty2919
5th Gear Member
 
smitty2919's Avatar
 
Join Date: Sep 2009
Location: KY, was MA
Posts: 2,797
Default

...just post pics of wheels in here lol

make sure you can get a re-alignment for free bc if you get one now and spend $70-$100 with no CC plates....im willing to bet that they wont be able to get the car within spec sitting that low...in which case you need to put CC plates in then get it re-aligned again.
smitty2919 is offline  
Old 04-01-2010, 10:28 AM
  #62  
budders
4th Gear Member
Thread Starter
 
budders's Avatar
 
Join Date: Jun 2009
Location: PA, Killadelphia
Posts: 1,373
Default

yeah I know they're not gonna be 100% correct. I think I can get one for like 25 bucks,my friends dad works at a nissan dealer. Should I let them do it?
budders is offline  
Old 04-01-2010, 10:31 AM
  #63  
dr.apex
2nd Gear Member
 
dr.apex's Avatar
 
Join Date: Feb 2010
Location: Illinois
Posts: 364
Default

Stance looks great. I can't wait to see pics with the new wheels.
dr.apex is offline  
Old 04-01-2010, 10:36 AM
  #64  
budders
4th Gear Member
Thread Starter
 
budders's Avatar
 
Join Date: Jun 2009
Location: PA, Killadelphia
Posts: 1,373
Default

me niether the wheels should be here today says ups.com
budders is offline  
Old 04-01-2010, 10:51 AM
  #65  
amoosenamedhank
5th Gear Member
 
amoosenamedhank's Avatar
 
Join Date: Nov 2005
Location: MN
Posts: 4,412
Default

dammit I just went through 2 pages of this for no pictures with the new wheels.... /fail
amoosenamedhank is offline  
Old 04-01-2010, 10:52 AM
  #66  
smitty2919
5th Gear Member
 
smitty2919's Avatar
 
Join Date: Sep 2009
Location: KY, was MA
Posts: 2,797
Default

if it were me, i would get it aligned with stock rims on as to not worry about them scrathing the new wheels when the clamp those thing to the rims for the copmuter to read.

and i dont know if you saw my post...but ask, if they cant get it within spec can you bring it back if you need CC plates free of charge...or have them see if they think they can get it within spec before they go through the whole thing.
smitty2919 is offline  
Old 04-01-2010, 10:56 AM
  #67  
budders
4th Gear Member
Thread Starter
 
budders's Avatar
 
Join Date: Jun 2009
Location: PA, Killadelphia
Posts: 1,373
Default

Originally Posted by smitty2919
if it were me, i would get it aligned with stock rims on as to not worry about them scrathing the new wheels when the clamp those thing to the rims for the copmuter to read.

and i dont know if you saw my post...but ask, if they cant get it within spec can you bring it back if you need CC plates free of charge...or have them see if they think they can get it within spec before they go through the whole thing.


im just gonna have them get it close to spec as possible, and if its like HORRENDOUSly bad then ill get the CC plates sooner or later, and dont worry ill put the stock wheels on when i go get it aligned. but im gonna mount em up just to see how they look and to take pictures for you guys.

Originally Posted by amoosenamedhank
dammit I just went through 2 pages of this for no pictures with the new wheels.... /fail


Ill post the pictures on the original post i made, and ill make one on the latest page too. so dont worry. lol sorry man.
budders is offline  
Old 04-01-2010, 11:55 AM
  #68  
mrsinister2424
3rd Gear Member
 
mrsinister2424's Avatar
 
Join Date: Dec 2008
Location: CA
Posts: 588
Default

Originally Posted by budders
im just gonna have them get it close to spec as possible, and if its like HORRENDOUSly bad then ill get the CC plates sooner or later, and dont worry ill put the stock wheels on when i go get it aligned. but im gonna mount em up just to see how they look and to take pictures for you guys.





Ill post the pictures on the original post i made, and ill make one on the latest page too. so dont worry. lol sorry man.
I was able to get to -1.5 camber after installing H&R with no CC plates.
mrsinister2424 is offline  
Old 04-01-2010, 12:50 PM
  #69  
budders
4th Gear Member
Thread Starter
 
budders's Avatar
 
Join Date: Jun 2009
Location: PA, Killadelphia
Posts: 1,373
Default

is that bad im guessing? or good? lol
budders is offline  
Old 04-01-2010, 12:55 PM
  #70  
dr.apex
2nd Gear Member
 
dr.apex's Avatar
 
Join Date: Feb 2010
Location: Illinois
Posts: 364
Default

Originally Posted by amoosenamedhank
dammit I just went through 2 pages of this for no pictures with the new wheels.... /fail
lmao...you got PUNK'T!!
dr.apex is offline  


Quick Reply: Lower Than A Lamborghini (Pics H&R SS)



All times are GMT -5. The time now is 10:35 PM.