4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

GAUGES AFTER SUPERCHARGING????

Thread Tools
 
Search this Thread
 
Old 06-15-2010, 11:03 PM
  #1  
Rockwell28
4th Gear Member
Thread Starter
 
Rockwell28's Avatar
 
Join Date: Jun 2010
Location: TEXAS
Posts: 1,452
Exclamation GAUGES AFTER SUPERCHARGING????

what gauge besides a boost gauge is a must when puttin a blower on is an wideband A/F gauge a must?
Rockwell28 is offline  
Old 06-15-2010, 11:09 PM
  #2  
PurpleIcedGT
6th Gear Member
 
PurpleIcedGT's Avatar
 
Join Date: Aug 2009
Location: New Jersey
Posts: 6,028
Default

wideband air/fuel is always important, then another popular one is oil pressure.
PurpleIcedGT is offline  
Old 06-16-2010, 12:15 AM
  #3  
Rockwell28
4th Gear Member
Thread Starter
 
Rockwell28's Avatar
 
Join Date: Jun 2010
Location: TEXAS
Posts: 1,452
Default

alright thanks for that wasnt for sure on it bc of seeing stangs with just the boost gauge in it. so an additionail oil gauge besides the stock one is a must too?
Rockwell28 is offline  
Old 06-16-2010, 06:59 AM
  #4  
PurpleIcedGT
6th Gear Member
 
PurpleIcedGT's Avatar
 
Join Date: Aug 2009
Location: New Jersey
Posts: 6,028
Default

I wouldn't say a must....I would say its one of the more common ones used.
PurpleIcedGT is offline  
Old 06-16-2010, 09:13 AM
  #5  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default

The stock oil psi gauge sucks...its simply an on/off switch...above 6psi(i think) it shows good and below shows bad
dimebag is offline  
Old 06-16-2010, 11:05 AM
  #6  
school boy
5th Gear Member
 
school boy's Avatar
 
Join Date: May 2009
Location: kentucky
Posts: 2,241
Default

another good one to have is fuel pressure. but any extra monitoring guages are a good safty net
school boy is offline  
Old 06-16-2010, 01:00 PM
  #7  
Rockwell28
4th Gear Member
Thread Starter
 
Rockwell28's Avatar
 
Join Date: Jun 2010
Location: TEXAS
Posts: 1,452
Default

gotcha that way ya can just keep an eye on every single thing thats going on b4 ya blow smthn or tear it up instead of guesswork. gotcha
Rockwell28 is offline  
Old 06-16-2010, 04:08 PM
  #8  
Jay-rod427
3rd Gear Member
 
Jay-rod427's Avatar
 
Join Date: Mar 2010
Location: KS
Posts: 555
Default

Boost, A/F ratio/ Fuel pressure/ Oil pressure/ Water temperature are all important gauges to be accurate. Get one of the pods that surrounds the stock gauge bezel and include all of these.

Especially a motor that is going to get beat on, keep on eye on all of these things.
Jay-rod427 is offline  
Old 06-16-2010, 04:16 PM
  #9  
amoosenamedhank
5th Gear Member
 
amoosenamedhank's Avatar
 
Join Date: Nov 2005
Location: MN
Posts: 4,412
Default

I'm currently running Boost/Vac and fuel pressure... a Wideband is nice but not completely necessary.. and dime is right, the stock oil pressure gauge is simply an on off switch. No information to be had from that.
amoosenamedhank is offline  
Old 06-16-2010, 09:51 PM
  #10  
Rockwell28
4th Gear Member
Thread Starter
 
Rockwell28's Avatar
 
Join Date: Jun 2010
Location: TEXAS
Posts: 1,452
Default

gotcha and its not going to be beat on too much maybe the track 2 or 3 times a month but its still kind of a dd. another ting that kinda pushed me away from the fuel pressure gauge was sm1 saying its dangerous to run a fuel pressure line to the interior of your car can ya kinda gauge ya a/f ratio as far as lean/rich by just having the fuel gauge? bc I was under the impression that the a/f gauge was a tuning tool. and jay rod I was gonna go with the autometer instrument cluster that holds 2 gauges. is that the one you are referring to? or are you talking about one of the multifunction gauges? and thanks for all the info!

Last edited by Rockwell28; 09-22-2012 at 12:29 PM.
Rockwell28 is offline  


Quick Reply: GAUGES AFTER SUPERCHARGING????



All times are GMT -5. The time now is 12:41 AM.