DIY COP Tester
#21
In case anyone is interested here's how the project turned out:
I will be doing a complete writeup including the schematic, parts list, drilling template for the project box, and printable panel label; and post it to my website.
It works very well, I took it to my brother's on T-Day and we went through his "junk drawer"; identifying three marginal COPs that had worked but were suspect, and two others that were OK but weak.
I will be doing a complete writeup including the schematic, parts list, drilling template for the project box, and printable panel label; and post it to my website.
It works very well, I took it to my brother's on T-Day and we went through his "junk drawer"; identifying three marginal COPs that had worked but were suspect, and two others that were OK but weak.
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM