When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
idk im debating doing them or not you guys think theyre the best bang for the buck?
f*** no. and whoever said 1200$ for cams and install cant do math. the cams themselves are 650, degreeing the cams is about 200. labor is going to be a minimum 500. if you get stage 2's you need to buy valvesprings, and labor goes up with that as well. then you need a dyno tune. you also need new gaskets for your valvecovers, intake manifold, etc...
all said and done, 2000+ for cams. hell no thats not a best bang for the buck since you only get about 30-40whp.
for half of that you can get a nitrous kit with all the bells and whistles. for about the same price you can piece a supercharger setup. both will put a cammed 2v to shame.
11-25-2010, 03:43 PM
