4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

So many on going problems with the stang..

Thread Tools
 
Search this Thread
 
Old 11-08-2011, 03:01 PM
  #1  
98mustangkidd
1st Gear Member
Thread Starter
 
98mustangkidd's Avatar
 
Join Date: Sep 2010
Location: Maryland
Posts: 147
Default So many on going problems with the stang..

So the first problem just started yesterday and its with the clutch/transmission, I have a 98 mustang gt 5 speed.. when im sitting there and have it out of gear it makes this clunking noise and you can feel it in the shifter when you grip it. It doesn't do it all the time and goes away but then can come back... any ideas.

The second problem im having is hanging rpms... I know a usual mustang thing but my car only does it every once in awhile and when I shut it off and then turn it back on it runs fine. Just a guess but could it be because I have a pi intake manifold and dont have pi heads, thinking maybe its getting too much air for the heads? Just a thought...

The third thing is a d**n dip stick tube and the dip stick.. called the dealership and they are discontinued for a 98.. where can I find one to fit my car?

All input would be greatly appreciated!
98mustangkidd is offline  
Old 11-08-2011, 05:27 PM
  #2  
Bpohlman13
3rd Gear Member
 
Bpohlman13's Avatar
 
Join Date: Mar 2010
Location: California
Posts: 611
Default

The thing for the hanging rpms is probably that you have a dirty IAC. Take it off and blow some carb cleaner through it. I dunno about the other two though.
Bpohlman13 is offline  
Old 11-08-2011, 07:21 PM
  #3  
98mustangkidd
1st Gear Member
Thread Starter
 
98mustangkidd's Avatar
 
Join Date: Sep 2010
Location: Maryland
Posts: 147
Default

I got a brand new iac not too long ago. Probably about 2 months. Do you think it got dirty that quick? And I do have a small valve cover leak that it gonna be fixed just waiting on parts, could that effect it?
98mustangkidd is offline  
Old 11-09-2011, 10:45 AM
  #4  
uberstang1
Chupacabra
 
uberstang1's Avatar
 
Join Date: Jul 2004
Location: wilkes-barre PA
Posts: 9,621
Default

U can always get a flexible lokar dipstick tube off summit but the btch is almost 100$. The clunk could be the trans mount, when i snapped mine it did the same thing.
uberstang1 is offline  
Old 11-09-2011, 04:04 PM
  #5  
98mustangkidd
1st Gear Member
Thread Starter
 
98mustangkidd's Avatar
 
Join Date: Sep 2010
Location: Maryland
Posts: 147
Default

Yeah that is pretty expensive but i need it so i guess i might look into it. Im going to search in junk yards and stuff soon so we will see. Thats my last resort though. For the transmission mount, thats good thinking. im gonna check it out. It wouldnt do it all the time right? just every once in awhile? Its a really good possibility because i can put it in different gears and it wont go away but then all of a sudden it will just stop. So im going to check it out.
98mustangkidd is offline  
Old 11-09-2011, 04:07 PM
  #6  
98mustangkidd
1st Gear Member
Thread Starter
 
98mustangkidd's Avatar
 
Join Date: Sep 2010
Location: Maryland
Posts: 147
Default

Also uber, like a week before the american muscle show i had lowered my mustang with super sports.. lately now, probably about 3 or 4 weeks now my steering squeaks like hell. Im leaning towards it being the bushings, but im not really sure. It does it every time i turn left or right even the slightest turns but doesnt happen once im going.
98mustangkidd is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Seanam
V6 S197 General Discussion
5
10-04-2015 10:15 AM
mdj89
5.0L (1979-1995) Mustang
7
09-23-2015 08:49 AM
kachuy10
2005-2014 Mustangs
7
09-22-2015 01:27 PM
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM



Quick Reply: So many on going problems with the stang..



All times are GMT -5. The time now is 08:21 PM.