Detroit Locker reviews ?!
#1
Detroit Locker reviews ?!
I plan on putting in a Detroit Locker diff in my car. I dont feel like dealing with clutch packs anymore. What are some opinions on that unit. and while im in there im gonna slap in 3.73 gears too!
This is the one I plan to get:
http://www.summitracing.com/parts/DTL-187C147A/
This is the one I plan to get:
http://www.summitracing.com/parts/DTL-187C147A/
#4
Which unit you want could have a lot to do with what you plan to do with the car.
I LOVE my Auburn Pro unit. It is TIGHT and provides excellent lock up for drag usage. Since it is so tight, it will not differentiate quite as well in autox type situations(tight turns). This could be OK if you need more help getting the car to turn, but it could also be a hindrance to corner exit forward bite.
OP,
What are you planning to do with the car?
If drag racing with sticky tires is on the list, I would also suggest upgrading to 31 spline while you are doing all of this.
I LOVE my Auburn Pro unit. It is TIGHT and provides excellent lock up for drag usage. Since it is so tight, it will not differentiate quite as well in autox type situations(tight turns). This could be OK if you need more help getting the car to turn, but it could also be a hindrance to corner exit forward bite.
OP,
What are you planning to do with the car?
If drag racing with sticky tires is on the list, I would also suggest upgrading to 31 spline while you are doing all of this.
#6
yeah, ive felt that "bang" before, my Old man is running a power trax locker in his car. I was thinking about the drive-ability issues, but I am deff not the kinda person heading to the Nurburg Ring. Mosty 1/4 mile, 1/8th mile stuff which is why i wanted a locker. Maybe are there other products out there that are a little more forgiving than a locker? i just gont like how sometimes one wheel will fire up first with the trac lok diff.
#8
I did some thinking, and what i came up with is that if i go ahead and put the locker in, i think im going to just go the whole 9 yards and get the rear end to the point where i wont have to touch it again for as long as i have the car. soo with that being said, while im in there, like wannabegearhead said, im gonna upgrade to the 31 spline axles, and change out all the bearings and seals too. also put in 3.73 gears. itl cost alot extra but it seams like the right thing to do. that way in the future if a supercharger finds its way on the motor, i know the rear end will be able to take it, and not blow up into bits and pieces the first time i hit it.
scratch that, Ive read tons of good things on the truetrac diff, it has no clutch packs so its maintainance free, ill still get to be able to light up both wheels, and it will be much easier to drive with out the clunking from a locker. good call ??
scratch that, Ive read tons of good things on the truetrac diff, it has no clutch packs so its maintainance free, ill still get to be able to light up both wheels, and it will be much easier to drive with out the clunking from a locker. good call ??
Last edited by rastarocket; 03-17-2012 at 04:32 PM.
#9
My Auburn Pro diff will NEVER leave you with just one wheel spinning!
It is a tight cone style diff that will absolutely give you the locking you want, but will drive good on the street. You can hear one tire slipping over the surface in parking lots if it is wet or sandy to reduce the traction.
It is a tight cone style diff that will absolutely give you the locking you want, but will drive good on the street. You can hear one tire slipping over the surface in parking lots if it is wet or sandy to reduce the traction.
#10
My Auburn Pro diff will NEVER leave you with just one wheel spinning!
It is a tight cone style diff that will absolutely give you the locking you want, but will drive good on the street. You can hear one tire slipping over the surface in parking lots if it is wet or sandy to reduce the traction.
It is a tight cone style diff that will absolutely give you the locking you want, but will drive good on the street. You can hear one tire slipping over the surface in parking lots if it is wet or sandy to reduce the traction.