JAX04's 347ci LSx New Edge- Twin 66/65-PG-Holley Dominator etc.. Street Machine
Well this is the re-do of the last car with a very clean chassis and and great looking interior.
2000 GT 347" Single CRT 88mm Power Glide Trans (built with brake) PTC Custom Converter 3.27 rear end Holley Dominator Edlebrock ProFlo xT 16 fuel injectors: 120lb primary 160lb uppers Tokico shocks all around with Steeda Springs, Steeda caster camber plates SVT rims and rear spoiler Mach 1 chin spoiler (swapping back to cobra front bumper) Ive got a set ofa Qa1 Double Adjustable coilovers and a bracket kit, i may go ahead and install them. Have not decided yet. This is supposed to be a street Rod, so we shall see. Everything is re-purposed from the "race" car. So, some things might seem weird or overkill for the street. I agree. But damn it, im not getting rid of that intake, ive put too much time into it. lol I would use a th400 instead of a Powerglide, but i wont come out ahead, ill have to spend a bunch more money, we'll see what the future holds. Ive still got the AJE crossmember, engine mounts, trans mount and driveshaft from the previous car. This should be just a drop in and go, ill change things later. I wanna drive. http://i366.photobucket.com/albums/o...02pt0/car1.jpg http://i366.photobucket.com/albums/o...02pt0/car2.jpg http://i366.photobucket.com/albums/o...0/IMAG0683.jpg http://i366.photobucket.com/albums/o...0/IMAG0682.jpg http://i366.photobucket.com/albums/o...0/IMAG0684.jpg http://i366.photobucket.com/albums/o...5/IMAG0559.jpg |
Well crap, I have to sub to another thread? I guess Ill stick around then.
|
Originally Posted by stevednmc
(Post 8138069)
Well crap, I have to sub to another thread? I guess Ill stick around then.
Well i appreciate you following along :) thank you sir :icon_dance-cpatch: |
Thanks to my buddy Trent who came over to lend a hand with the heavy lifting, im back on schedule.
Aje Kmember is in, Cobra brakes and steeda suspension are back in. Engine is in and intake setting in for mock up. I was gonna try like hell to use the ford radiator and huge ass fan, but it looks like that may not end up working, its just too big and too tight to the motor. Think GTO space between engine and radiator. If i had a smaller more compact turbo id do it, but this sucker is down right huge. SO. Ill figure something else out. Anywho, ordered a new mandrel bends builder kit, 02 bungs, and new turbo flange today. so the turbo kit should be under way very soon, as that is truly the only piece to this puzzle now. Trans will bolt right back in, and driveshaft is proper length as well. While im waiting on the bends, ill bolt all of that back in and even install this fancy driveshaft loop i have and the torque box re enforcement plates that are here, **** i never installed on the first stang. anywho, not many pics. http://i366.photobucket.com/albums/o...5/IMAG0688.jpg http://i366.photobucket.com/albums/o...5/IMAG0689.jpg |
I wanna be mad that you're putting and ls in a mustang but I can't cause it's cool. Nice job on the swap.
|
Alot of chevy guys run their motors in fox mustangs, mainly because its an optimal chasis for drag racing. If you really think about it theres alot more chevys running ford parts than fords running chevys. The good ole 9 inch.
OP: Nice job so far on the swap. |
Thanks Uber, and I couldn't have said it better myself.
|
What you thing so far, with all the parts available nowadays its almost a drop in swap for a LSX with the proper k member.
|
Originally Posted by uberstang1
(Post 8138575)
What you thing so far, with all the parts available nowadays its almost a drop in swap for a LSX with the proper k member.
Hell with the holley, its plug and play too, 12v constant, ground and 12v switched, done. :icon_headbang: |
Ok, i have not updated since not much has been going on,
BUT! Some changes have been made to the plans The motor is at AES racing in Elk Grove Illinois for an upgrade to an Iron motor, and 370 inches of Diamond and Callies fury! The single Turbo has been sold and is being replaced with 2 (TWO) Turbonetics 66/65 Turbos! This is how the trunk is going to look when complete. http://i366.photobucket.com/albums/o...ps2b44ea89.jpg DISCLAIMER! THIS PICTURE IS NOT MY CAR! ITS SOMEONE ELSES, BUT I THINK THIS IS WHAT IM GOING FOR! http://i366.photobucket.com/albums/o...psd00c8772.jpg |
All times are GMT -5. The time now is 03:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands