Originally Posted by uberstang1

Well another car in and out of the shark tank. Car is a 4v swapped gt, did a procharger p600b install should of went in alot smoother and faster but had to fabricate some brackets, p-s lines and fix a few unexpected problems. Unfortuantly one of the set backs was right off the bat when i went to put in a fresh set of tr6 plugs at .28. Upon pulling the cyl 4 plug wire i head a big bloop and before i even saw i knew the well was filled with oil, apparently the poor quality job of a professional shop ended up with someone inexpereinced ruff housing the freshly powdercoated valve cover onto the head which allowed one of the plug well seals to fall of into the head, car was driven like this with no miss and by some stroke of god the grommt ddidnt wedge ino a rocker resulting in a bent valve, but it was a hair away from one ,anyway here are some pics and videos.
Before

Valve cover

Font mount

Head unit

Bay

First start up
http://s82.photobucket.com/user/uber...7ff8c.mp4.html
Walk around
http://s82.photobucket.com/user/uber...09710.mp4.html
Test drive
http://s82.photobucket.com/user/uber...54ff6.mp4.html

Originally Posted by jeh4269

I sure hope that guy appreciates all your hard work.Does look really nice.

Originally Posted by jeh4269

I sure hope that guy appreciates all your hard work.Does look really nice.

Originally Posted by uberstang1

I dunno the owner seems a little fruity

Originally Posted by uberstang1

I dunno the owner seems a little fruity

Originally Posted by jeh4269

Do I know the guy?The only fruity guys I know are the ones on Fruit of the loom underwear.I switched to Hanes bc they kept giggling at me everytime I put a pair on.