FRPP Hotrod cam owners, I need help......
08-19-2009, 02:55 PM
#11
rivercitymike: Anyway to track down that tech information?????
Also, I was emailed a new tune from Matt at Bamachips yesterday evening that was written from scratch off of a base file. I installed tune and drove the car down the street to my buddys house and around the hood. Light never came on, it usually (90% of the time) comes on. The true test will be on the way home from work today because I'll be in stop and go traffic where the O/D off light would always (100%) start flashing. I'll keep everyone updated...........
Also, I was emailed a new tune from Matt at Bamachips yesterday evening that was written from scratch off of a base file. I installed tune and drove the car down the street to my buddys house and around the hood. Light never came on, it usually (90% of the time) comes on. The true test will be on the way home from work today because I'll be in stop and go traffic where the O/D off light would always (100%) start flashing. I'll keep everyone updated...........
08-19-2009, 05:34 PM
#12
Join Date: Aug 2008
Location: California
Posts: 23
Street Stallions: I read the about Ford releaseing the updated
Hot Rod cam tech information on another Mustang site. It was a recent post by one person, as part of an overall thread. One thing, this post did not say how to acquire this info. I'd either contact FRPP or Sutton High Performance. From what I understand, they were the tuners that did the most R&D on the Hot Rods. Also, while on the phone to one of their reps, he said the Hot Rods gained a lot of hp. Evidently, they know something that other tuners don't.
Hot Rod cam tech information on another Mustang site. It was a recent post by one person, as part of an overall thread. One thing, this post did not say how to acquire this info. I'd either contact FRPP or Sutton High Performance. From what I understand, they were the tuners that did the most R&D on the Hot Rods. Also, while on the phone to one of their reps, he said the Hot Rods gained a lot of hp. Evidently, they know something that other tuners don't.
08-19-2009, 06:23 PM
#13
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
not sure but rivercitymike might be referring to this
install manual. on page 2 they show the
recommended timing for the hot rod cams.
http://www.fordracingparts.com/downl...tM-6550-3V.pdf
install manual. on page 2 they show the
recommended timing for the hot rod cams.
http://www.fordracingparts.com/downl...tM-6550-3V.pdf
08-20-2009, 07:29 AM
#14
2nd Gear Member
Thread Starter
Join Date: Apr 2008
Location: N. TX
Posts: 241
Well, got ANOTHER tune file. So far so good on the way home last night. Driving car today again to see if all is well. Fingers crossed..... sent that info to Bamachips, Im sure they havent but it cant hurt to send it and ask them about it...
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM
