New 2010 owner with questions?
I bought a 2010 GT a few weeks ago, used. I'm new to the mustang and have spent the past few weeks reading alot on this forum and here are the questions:
1) I've read that the new increase in HP for the 2010 model is because of a better CAI and therefore an aftermarket CAI will not give me much of a gain? 2) With the better 2010 in-take, will an SCT tuner, as a stand alone, give me additional HP vs adding an aftermarket intake? 3) I'm highly interested in a Detriot Rocker Cam from Brenspeed and was wondering what you guys/gals thought about that as a first upgrade? I plan on adding a Super Charger down the road. And what is a rough estimate of cost to have a shop install? 4) If you're in Georgia, any recommendations on a shop that can install the Cam? Sorry for all the questions, after 3 weeks of reading, I couldn't really find an exact answer to these questions so I thought I would ask. Thanks!! |
Im no expert but if you plan on supercharging down the road then just buy the tuner and tune.
i have heard nothing but good things about brenspeeds cams but i believe with cams u also need steeper gearing. dont know if u have the 3.73 rear axle package or not. i also have heard shop costs for installation are between 4-700 bucks depending on where you go. |
I do have the 3.73 rear axle.
|
Originally Posted by f4ifrank
(Post 7017708)
I do have the 3.73 rear axle.
if and when i do cams i will have a mechanic do it on the side for me. benefits of working in the car biz lol. you need the tuner first tho. |
our 2010's stock cai is very good. i just spoke to brenspeed this past week and asked him about cai's and they said don't waste ur money unless u get the jlt 110mm and even then they only see a couple horse gain. just get a tuner from brenspeed and use ur stock intake. he also said the stock intake is great with cams.
|
All times are GMT -5. The time now is 08:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands