paxton novi2200 air filter sensor extension question
05-22-2010, 12:10 PM
#1
2nd Gear Member
Thread Starter
Join Date: Oct 2008
Location: Oregon
Posts: 311
paxton novi2200 air filter sensor extension question
we need to do a line extension, the one from factory have 5 lines, and each have a different color, however the one come from paxton are not exactly the same colors as factory, my question: is it really matters to do a color match? or just connect them, and use elc tape to seal them?
05-22-2010, 02:00 PM
#2
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
i wouldn't worry too much about color matching. sure
it would be nice but it's not absolutely necessary. also
since the spliced in extension is away from the connector,
the wire colors are still maintained at the connector for
future reference.
it would be nice but it's not absolutely necessary. also
since the spliced in extension is away from the connector,
the wire colors are still maintained at the connector for
future reference.
05-22-2010, 07:12 PM
#3
2nd Gear Member
Thread Starter
Join Date: Oct 2008
Location: Oregon
Posts: 311
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
Calizic
4.6L (1996-2004 Modular) Mustang
5
08-28-2015 01:46 PM