ttujames

Hey guys, having an issue and was hoping to maybe get an idea of what i'm looking at here. While driving last night, i went to upshift to 3rd during normal driving, when i pulled out of 2nd the shifter felt off and then wouldn't shift into 3rd. I pulled off and couldn't shift into any gear. Jiggled with it a while and was able to get 1st and 2nd and was able to make it home. After playing a little longer by sliding the shifter all the way to the left where it became resistant but seemingly past where 1st and 2nd are, i now have 3rd, 4th,5th, and reverse working fine, but not 1st and 2nd. Also the shifter(stock) is going so far left it's hitting the bezel. Has anybody seen or heard of something like this? Thanks ahead of time.

jewc75

Get under the car and make sure everything is tight on the shifter.

ttujames

Well I had to go out of town so I haven't been able to get under it, but I stuck phone through the shifter hole and recorded the linkage and everything looks normal to me.
http://www.youtube.com/watch?v=s4Wam...e_gdata_player

Now it won't go into any gear though. it will go into 1st and 2nd positions but wont engage and has a lot of play left and right, the rest of the gears it it wont even go in.